PX-RTU Multi-Surface Disinfectant Cleaner

Key Features & Benefits:

• Ready-to-use formulation - Eliminates the need for on-site mixing, supporting faster deployment and consistent application.
• Broad-spectrum antimicrobial activity - Bactericidal, yeasticidal, fungicidal, and virucidal performance, tested to relevant EN standards.
• Denatures DNA and RNA - Provides effective microbial control through a recognised mode of action.
• Alcohol-free and non-corrosive - Suitable for frequent use on compatible hard, non-porous surfaces without increasing corrosion risk.
• No rinsing required - Supports efficient workflows, particularly in operational or time-sensitive environments.
• Compatible with wipes - Can be applied using dry wipes or microfibre cloths, aligning with established professional cleaning practices.
• Eucalyptus fragrance - Leaves a clean, fresh scent suitable for professional environments.
• Van-friendly trigger spray format - Designed for convenience, allowing pest control technicians to keep a ready solution available when required.

How to Use:

Remove any visible dirt or soiling prior to disinfection. Direct the spray nozzle at the surface and apply the product liberally. Leave for the required contact time, then wipe away excess liquid or allow to air dry.

When applied using dry wipes or microfibre cloths, a minimum contact time of 5 minutes must be observed after wiping.

Not suitable for disinfecting medical devices. Always follow label instructions and site-specific safety procedures.

Why Pest Control Professionals Choose PX-RTU:

PX-RTU is designed for practical, real-world use by professionals. The trigger spray format challenges the perception that ready-to-use products are purely domestic by offering a reliable, compliant option that can be kept on the van for immediate use. It reduces preparation time, avoids dilution errors, and supports rapid response situations where hygiene intervention is required without delay.

Additional Information:

• Active ingredients include quaternary ammonium compounds and diamines, formulated for professional disinfection.
• Tested to multiple EN standards, including bactericidal, yeasticidal, fungicidal, and virucidal efficacy.
• Harmful to aquatic life with long lasting effects. Avoid release to the environment.
• Manufactured in the UK for Killgerm Chemicals Ltd.
• Packaging components are widely recyclable. Bottle should be rinsed before recycling.
• For batch code and expiry date, see neck of bottle.
• Label reference: 09/25.

FAQs

Is PX-RTU suitable for professional use?

Yes. It is specifically intended for use by professionals in homes, commercial buildings, and institutional environments.

Does PX-RTU need to be diluted before use?

No. PX-RTU is supplied ready to use, removing the need for mixing from concentrate.

Can it be used with wipes instead of spraying directly?

Yes. When applied using dry wipes or microfibre cloths, a minimum contact time of 5 minutes is required after wiping.

Dethlac Insecticidal Lacquer Spray

Dethlac Is Back – Relaunched in 2025 with an Improved Formula

Discontinued in 2024 and now back by popular demand, Dethlac Insecticidal Lacquer returns in 2025 with an enhanced formula. Trusted by professionals and homeowners alike since 1959, Dethlac now offers the same long-lasting, weatherproof protection—revamped for today’s pest control needs.

Key Benefits:

• ✔ Effective Insect Control - Kills ants, cockroaches, woodlice and other crawling insects on contact.
• ✔ Long-Lasting Protection - Once dry, the clear lacquer remains active for months, delivering continuous insect control.
• ✔ Dual-Active Formula - Contains Deltamethrin (0.02%) and Pyrethrins (0.08%) for fast knockdown and extended residual activity.
• ✔ Weatherproof Coating - Ideal for high-traffic areas or outdoor use; remains effective even after rain or surface washing.
• ✔ No Visible Residue - Dries to a non-staining, clear finish that blends seamlessly with treated surfaces.
• ✔ HSE Approved - Registered under HSE No. 6891. Approved for both professional pest controllers and amateur users.

Ideal for Pest Control Professionals & Homeowners

Dethlac is trusted by pest control operators for its convenience, reliability and lasting results. Unlike typical insect sprays, this lacquer-based treatment continues to work long after application, making it a smart choice for integrated pest management.

Why pest controllers choose Dethlac:

• Excellent for long-term insect control in sensitive or hard-to-reach areas
• Supports IPM (Integrated Pest Management) strategies by reducing the need for frequent reapplications
• Ideal for entry points, skirting boards, doorways, patios, sheds and garages
• Discreet and efficient solution

Whether you’re tackling persistent crawling insect issues or delivering preventative treatments, Dethlac delivers visible results and lasting peace of mind.

How to Apply Dethlac Insecticide:

1. Shake well before use to activate the formula.
2. Spray directly onto non-absorbent such as skirting boards, door frames, window ledges, and patios.
3. Apply in short bursts (1–5 seconds) from 15–23cm away, covering bands approximately 8–15cm wide.
4. Allow to dry completely before allowing people or pets to re-enter the treated area.
5. Reapply only when necessary the lacquer remains effective for months but may need refreshing after heavy wear or abrasive cleaning.

⚠️ Avoid using on absorbent materials like carpets, wallpaper or unfinished wood.
⚠️ Do not spray directly on insects – treat the surfaces they crawl across.

Frequently Asked Questions

How quickly does Dethlac work?

After drying, insects that make contact with treated areas are typically killed within a few hours. The formula works through surface contact, so direct spraying isn’t necessary.

Is it suitable for outdoor use?

Yes – Dethlac’s lacquer is waterproof once dry, making it ideal for use on patios, doorsteps, garages, and external entry points.

Is Dethlac safe around children and pets?

Dethlac should always be used as directed. We recommend keeping children and pets away during application, and only allowing them back into the area once the surface is completely dry.

What surfaces can I use it on?

It should be applied only to hard, non-absorbent surfaces like metal, painted wood, plastic, tile, or concrete. Avoid fabrics and porous materials.

What pests does Dethlac kill?

It’s effective against a wide range of crawling insects including ants, cockroaches, woodlice and more.

Related Products:

Expand your pest control arsenal with these complementary solutions, designed to enhance your professional treatments:

1. Vazor RTU – A ready-to-use, insecticide-free spray that offers rapid knockdown of ants, fleas, bed bugs and other pests, ideal for sensitive areas and professional leave-behinds.
2. Vazor Ice – Instantly freezes crawling and flying insects on contact using cold technology, with no chemicals or residue left behind.
3. Aerosol Trigger Attachment – Makes applying aerosol products like Dethlac easier and safer, offering precise control and reducing chemical exposure.

Cimetrol Super RFU

Contains 0.1% w/w cypermethrin, 0.01% w/w pyriproxyfen and 0.05% w/w chrysanthemum cinerariaefolium extract.

Recommend for use in bedbug control, in conjunction with Cimetrol Super EW, due to its approval for use on mattresses.

A professional ready-for-use water-based spray based on cypermethrin, pyriproxyfen and chrysanthemum cinerariaefolium extract, for bedbugs, fleas and other crawling and flying insects. This includes, flies, mosquitos, mites, wasps and ants.

It is ideal for spot treatments on hard, non-porous surfaces, cracks and crevices and is approved for use on mattresses.

The unique 300ml bottle uses a bag-in-bottle vacuum action to deliver a continuous fine mist that spreads evenly on all surfaces, even when held at an angle or upside down.

Areas of use: domestic situations and public hygiene areas such as hospitals (not occupied wards), offices, industrial premises, museums, aircraft, ships, and military installations. Also for use outdoors on ant and wasp nests.

Space treatment: Apply 1ml of product per m³, as a fine mist.

Surface spray: Apply 20ml of product per m²