SANI-99 Black Mould Treatment Refill Pack (25 Sachets)

SANI-99 Black Mould Treatment Refill Pack (25 Sachets)

Create an account/Login

Spend £500 and get 1 x case 25x6g Sani-99 Black Mould
FREE OF CHARGE

Offer valid from 1st October - 30th November 2026. Terms and conditions.

Offer will be applied after the order is processed.

Order value excludes VAT and, to qualify, all goods will be invoiced at catalogue prices.

 

SANI-99™ Black Mould Treatment Refill Pack (25 Sachets)

SANI-99™ Black Mould Refill Pack keeps mould treatment services supplied. It contains 25 pre-measured 6g sachets: three sachets make one litre of treatment solution, so each pack makes up to 8 litres.

The odourless powder dissolves in water to treat black mould and other mould growth on hard surfaces in buildings, including walls, ceilings, window frames, bathrooms and kitchens. It can be applied by trigger spray, low-pressure mister or fogger, so technicians can match the method to anything from a single wall to a whole room.

Availability:In stock
SKU 600-000197

Key Features & Benefits

  • 25 pre-measured sachets: Makes up to 8 litres of black mould solution, with an accurate dose every time and no measuring on site.

  • Scales with your service: Use with the Starter Pack spray bottle for spot treatments, or with a mister or fogger for larger areas.

  • Simple, repeatable method: Spray, leave for 15 to 30 minutes, wipe and re-spray. Clear steps make the treatment easy to train, deliver and document.

  • No pre-cleaning required: Apply directly to the mould without dry-brushing or pre-cleaning, which removes a step from every treatment.

  • Built-in follow-up visits: The preventative protocol calls for a light spray every two weeks until the moisture problem is fixed, creating scope for scheduled return visits.

  • Compact sachet format: Sachets are easy to carry on vehicles and keep for 4 years when sealed.

  • Odourless powder: The powder has no odour.

How to Use

  1. Dissolve three 6g sachets (18g) in 1 litre of water in a spray bottle or mister. Do not use the powder neat.
  2. Do not dry-brush or pre-clean the mould.
  3. Lightly mist the affected area until wet.
  4. Leave for 15 to 30 minutes.
  5. Wipe the treated area, then apply a light second spray.
  6. For heavy contamination, carry out a second full treatment.
  7. As a preventative treatment, apply a light spray every two weeks until the moisture problem is fixed.

Ventilate the room during and after treatment. When fogging or misting a whole room, keep other people and pets out until the mist has settled. Do not use on people, animals or food, and do not mix with other chemicals, disinfectants or cleaning products.

Personal protective equipment: Wear chemical-resistant gloves at all times and safety glasses or goggles when spraying. Wear an FFP3 mask or P3 respirator when misting or fogging, or when treating heavy mould in confined spaces. See Section 8 of the safety data sheet.

Why Pest Controllers Choose This Product

The Refill Pack keeps a mould treatment service running. Pre-measured sachets keep dosing consistent across technicians, and the choice of spray, mister or fogger lets one product cover jobs of different sizes.

Pest control businesses already work in homes and commercial premises where damp and mould can occur. In England, social landlords also have duties to address damp and mould under Awaab's Law, which came into force in October 2025. SANI-99™ Black Mould lets pest control businesses respond to that demand with a simple, documented treatment method.

Additional Information

  • Product type: Biocidal product type PT2. The active substance is under review under GB BPR, with the HSE as competent authority.

  • Application methods: Trigger spray, low-pressure mister or fogger

  • Shelf life: 4 years from date of manufacture in the original sealed sachet. Use made-up solution within 90 days.

  • Safety data sheet

FAQs

How many litres does the Refill Pack make?

Three sachets make one litre of black mould solution, so a pack of 25 sachets makes up to 8 litres.

Can SANI-99™ Black Mould be applied with a fogger?

Yes. It can be applied by trigger spray, low-pressure mister or fogger. When fogging or misting a whole room, keep other people and pets out until the mist has settled.

Can I use the Refill Pack with the Starter Pack spray bottle?

Yes. Dissolve three sachets in 1 litre of water in the spray bottle to make one litre of solution.

What PPE do I need?

Chemical-resistant gloves at all times, safety glasses or goggles when spraying, and an FFP3 mask or P3 respirator when misting, fogging or treating heavy mould in confined spaces.

Use biocides safely. Always read the label and product information before use.

Related Products:

Expand your pest control arsenal with these complementary solutions, designed to enhance your professional treatments:

  1. SANI-99™ Black Mould Starter Pack – contains a reusable 1-litre spray bottle and three pre-measured 6g sachets, enough to make the first litre of treatment solution on site.
  2. FFP3 disposable mask – filter at least 95% of airborne particles, ideal for respiratory protection in construction, healthcare, and dusty settings
  3. IK 1.5 1 Litre Sprayer – for effective pest control, especially against wasps and other flying insects, the IK MULTI 1.5 sprayer, available through Killgerm, emerges as a solution.
  4. U240 Fogger – mains powered portable ULV applicator, with a simple variable flow control with finger operated dial.
More Information
Authorisation Number N/A
Professional use only No
PPE -

Available safety datasheets, labels & product leaflets will be visible in this section.